LED Track Light is a light mounted on a similar track. The angle of illumination can be adjusted arbitrarily, and it is generally used as a spotlight for places that require accent lighting. Speaking of track lights, I have to look back at its history. Earlier track lights were generally metal halide lamps and tungsten halogen light sources. Starting in 2012, LEDs have gradually entered a mature era. The track lights on the market have changed from the past. The metal halide light source is gradually replaced by the LED light source, thereby achieving more energy-saving and environmental protection, and now what people usually call track lights are gradually being collectively referred to as LED track lights. Because of its flexible installation characteristics, it is generally used as a special spotlight.
Types and methods of use of track lights
Lamp style selection
The lamp body structure of the track light is similar to that of the downlight, but it is equipped with a track part and an electrical part for more flexible installation and use. There are three basic styles of track lights:
1. The electrical part is arranged above the track lamp body:
2. The electrical part is connected with the track light body:
3. The electrical part is externally installed and does not adhere to the track lights.
Different track light styles can be flexibly selected according to different projects and space requirements.
Track style selection
There are lamp styles to choose from, and naturally there are track styles to choose from, and different track accessories can be equipped, so that everyone can try a variety of track forms.
Track types are generally divided into the following three types:
When designing, consider the combination of lamp control and select the type of track. The track has a standard length, and there are also various styles of joints and connectors to facilitate the connection of the track and realize various turning installations. It can be flexibly adjusted according to different ceiling trends and installation requirements in practical applications.
Led Track Light
The final installation form of the Clubs LED Track Light is determined by the installation method of the track. The installation methods of the track generally include surface installation, wall installation, embedded (with frame), and embedded (without frame).
Four ways to install the track.
1 surface mount
This installation method saves the track part, so the whole ceiling will look clean and tidy.
But this kind of installation method should pay special attention to the installation position and angle. At the design stage, it is necessary to determine the track light installation position and the number of lamps; at the same time, the projection direction and purpose of the lamps should be considered in combination with human activities and furniture layout. .
2 Hanging rail installation
This kind of installation method is powerful. Hanging the track in the air is similar to hoisting a chandelier.
When using this installation method, pay attention to design the installation method and angle in advance.
3 hidden tracks
At first glance, this installation method looks a bit like surface installation, but in fact, people hide the track part in the ceiling, design grooves in the ceiling, and install the track parts indented in the groove.
It is worth noting here that the track light selected for the hidden track installation method must be low and small to avoid excessive exposure of the light and make the ceiling look messy. At the same time, pay attention to the size of the groove opening to prevent the edge of the groove from blocking the light. Light outlet.
4 embedded track
Compared with concealed installation, this installation method is not too deep, and it is flush with the ceiling groove, and the light outlet of the lamp will not be blocked, so there are not too many restrictions on the choice of lamps.
The biggest feature of this installation method is that the track is not exposed and can be installed on the side and ceiling at will. However, the requirements for the lamps are relatively high. Due to the particularity of the installation, if you want to achieve the ideal light direction control, you must choose Adjust the track lights with a larger angle to match.
6 other forms of expression
With the diversification of scene requirements, manufacturers have also opened up their minds, and track lights have become more flexible and more observable.
Of course, in addition to the variety of tracks, track lights are not far behind. Do some optical design on the lamps, such as jumping out of scenes such as birds, flowers and fish!
Track light maintenance method
When using Customized LED Track Light, try not to switch frequently, because the current through the filament is greater than the current during normal operation when the lamp is frequently started, which will greatly reduce its service life. Minimize the frequent switching of track lights. During cleaning and maintenance, care should be taken not to change the structure of the lamp, and do not randomly replace some parts in the track light fixture.
Clean the dust and fingerprints on the reflector in time. In the case of traditional light sources, you should not directly touch the bulb wall with your hands. After the cleaning and maintenance, the lamps should be installed as they are, and do not miss or wrongly install the lamp parts.
Copyright © Shenzhen Jarstar Technology Co., Ltd. All Rights Reserved | Sitemap | Technical Support: